MS Shell Rolling

Precision MS Sheet Rolling Up to 4mm for Tanks, Vessels & Industrial Fabrication

High-Accuracy Shell Rolling for Pakistani Manufacturers & Fabricators

Need accurately rolled MS sheets up to 4mm thickness for tanks, vessels, silos, ducting, or fabricated machinery?

Our MS Shell Rolling service provides precision cylindrical, conical, and custom-rolled components from our Lahore fabrication facility, with capabilities for standard and custom diameters and project-specific requirements.

We serve manufacturers, engineering workshops, tank fabricators, and industrial contractors in Lahore, Karachi, Islamabad, Rawalpindi, Faisalabad, Gujranwala, Multan, Peshawar, and across Pakistan.

From sheet preparation and pre-bending to shell rolling and associated fabrication, our team focuses on dimensional accuracy, proper roundness, clean edges, and dependable turnaround.

MS Sheet Thickness: Up to 4mm
Service Base: Lahore, Pakistan
Coverage: Nationwide
Applications: Tanks • Silos • Ducting • Vessels • Machinery Components

Our sheet metal rolling services are designed for industrial and commercial fabrication projects where accurate diameter, consistent curvature, and reliable fit-up are essential.

Whether you require a single custom shell or multiple rolled sections for production, we can process MS sheets according to your specified dimensions and fabrication requirements.

1. Mild Steel (MS) Sheet Rolling

We provide MS sheet rolling up to 4mm thickness for cylindrical and custom applications.

Depending on your project requirements, we can work with:

• Standard cylindrical shell rolling
• Custom-diameter MS shells
• Tank shell sections
• Silo and hopper components
• Pipe and duct sections
• Machine and equipment components
• Fabricated structural components
• Small- and medium-batch production requirements

The required inside diameter, outside diameter, sheet thickness, sheet dimensions, quantity, and application are considered when determining the appropriate rolling process.

Pre-Bending & Controlled Rolling

Proper pre-bending is an important part of achieving a satisfactory finished shell. The sheet edges are prepared before the primary rolling operation to minimize excessive flat edges and improve the final cylindrical profile.

Our objective is a properly formed shell that facilitates subsequent welding, assembly, and fabrication.

Custom Dish Ends for Tanks, Vessels & Industrial Equipment

A rolled shell is only one part of many industrial tank and vessel assemblies. We can also provide mild steel dish ends in Pakistan for projects requiring curved end components.

Depending on the design and application, dish-end requirements may include:

• Flanged dish ends
• Torispherical-style ends
• Semi-elliptical configurations
• Custom fabricated end components
• Tank and vessel end sections

Dish-end dimensions are manufactured according to the project drawing and agreed technical specifications.

For procurement teams looking for a single fabrication source, combining MS shell rolling and dish ends can simplify sourcing, coordination, transportation, and final assembly.

Important: For pressure vessels and other regulated applications, dish-end geometry, material specification, thickness, forming method, welding procedure, and applicable design/code requirements must be confirmed before fabrication.

Accurate Cylinders, Cones & Curved Sheet Components

Not every fabrication project requires a simple cylindrical shell.

Our custom cone rolling Lahore service is suitable for applications requiring tapered or conical components, including:

• Hoppers
• Conical tank sections
• Silo components
• Transition pieces
• Industrial ducting
• Equipment housings
• Custom fabricated machinery components

The rolling process is planned around the required geometry to achieve proper alignment between the developed sheet and the finished component.

Designed for Better Fit-Up

Our rolling approach focuses on:

Correct sheet preparation → Pre-bending → Controlled rolling → Diameter verification → Fabrication-ready component

The goal is to reduce unnecessary correction work during welding and assembly while maintaining the required profile and minimum specified tolerances.

Precision Begins with the Right Rolling Process

Industrial sheet rolling requires more than simply passing a sheet through rollers.

The machine configuration, material thickness, sheet dimensions, required diameter, pre-bending requirements, rolling sequence, and operator control all influence the finished component.

Our fabrication setup uses 3-roll/4-roll bending technology appropriate to the job and material requirements.

This allows us to focus on:

• Consistent cylindrical curvature
• Accurate diameter formation
• Controlled pre-bending
• Reduced flat edges
• Proper alignment
• Repeatability for multiple components
• Efficient production for fabrication projects

For every project, the practical achievable tolerance depends on the material, thickness, dimensions, machine configuration, tooling, and required geometry. Technical requirements can therefore be reviewed against your drawing before production.

Storage Tank & Silo Manufacturers

Tank and silo manufacturers frequently require accurately rolled MS shell sections for:

• Water storage tanks
• Agricultural storage systems
• Chemical storage equipment
• Industrial storage tanks
• Silos and hoppers
• Process equipment

Accurate shell geometry helps simplify subsequent welding and assembly operations.

HVAC and industrial contractors can use rolled MS sheets for:

• Cylindrical duct sections
• Large-diameter transitions
• Industrial ventilation components
• Exhaust systems
• Equipment connections
• Custom fabricated ducting

Where drawings specify particular diameters or curved profiles, the required dimensions can be reviewed before rolling.

Boiler and vessel manufacturers may require rolled shell sections and associated fabricated components.

For these applications, technical specifications are particularly important. Material grade, thickness, dimensions, welding requirements, forming requirements, inspection criteria, and applicable codes should be established before fabrication.

Our parent fabrication operation can support associated cutting and welding requirements where applicable.

Engineering workshops across Pakistan can outsource rolling when their own facilities cannot efficiently produce the required cylindrical or conical sections.

Typical requirements include:

• Machinery housings
• Fabricated equipment
• Industrial components
• Cylindrical covers
• Custom shells
• Hoppers
• Conical sections
• One-off prototypes
• Production batches

Instead of investing in dedicated rolling equipment, workshops can outsource the required component and receive it ready for the next fabrication stage.

Why We Don't Publish a Flat Per-Kilogram or Per-Foot Rate

The price of MS shell rolling varies significantly from one project to another.

A 4mm sheet does not automatically have the same rolling cost as another 4mm sheet because the required diameter, sheet dimensions, quantity, geometry, preparation, and production requirements can all change the work involved.

Our project-based quotation considers factors such as:

• MS sheet thickness
• Inside or outside diameter
• Sheet length and width
• Required shell geometry
• Cylindrical or conical configuration
• Pre-bending requirements
• Quantity
• Material supplied by the customer or fabricator
• Additional cutting or fabrication
• Production schedule
• Packing and transportation requirements

Competitive Project-Based Pricing

Because MS sheet rolling and dish-end fabrication depend heavily on custom diameters, exact sheet thickness up to 4mm, and total project volume, we offer tailored and highly competitive project-based pricing rather than an artificial flat rate.

Contact our Lahore plant for a rapid quotation, typically within 24 hours after receiving complete technical information.

Receive a Ready-to-Use Fabricated Component

When you order from a specialized rolling provider, you may still need to coordinate separately for cutting, welding, finishing, and other fabrication operations.

Our advantage comes from being part of an established steel fabrication ecosystem.

Where required and technically applicable, your project can be coordinated with associated services such as:

Sheet Cutting

Prepare sheets and components according to the required dimensions and fabrication drawings.

MS Shell Rolling

Form the sheet into the specified cylindrical or conical geometry.

Welding & Fabrication

Complete associated welding and fabrication work required for the finished component.

Finishing

Coordinate applicable finishing requirements according to the project's intended application.

This means you can source more than a rolled sheet—you can request a fabrication-ready or completed component from one industrial supplier.

For procurement departments, this can mean fewer vendors, simpler coordination, and a more streamlined production process.

From Drawing to Fabrication-Ready Component

01 — Technical Requirement

Send us your drawing, dimensions, sheet specification, or project requirements.

02 — Drawing & Dimension Review

We review the required thickness, diameter, sheet dimensions, geometry, quantity, and fabrication requirements.

03 — Pre-Bending

Where required, the sheet edges are prepared through controlled pre-bending before the primary rolling operation.

04 — Shell Rolling

The MS sheet is rolled using the appropriate 3-roll or 4-roll bending process for the job.

05 — Dimensional Verification

The finished shell is checked against the agreed project dimensions and geometry.

06 — Fabrication & Dispatch

Where additional services are required, associated fabrication can be coordinated before the finished component is prepared for dispatch.

Industrial Capability. Technical Coordination. Nationwide Supply.

Precision-Focused Rolling

We approach every rolling project around its actual dimensional requirements rather than treating every sheet as a standard job.

Up to 4mm MS Sheet Thickness

Our specialized service is focused on MS sheet rolling up to 4mm, allowing us to maintain a clear service scope and efficient production workflow.

Custom Diameters

Whether you have a standard tank diameter or a project-specific requirement, provide the required dimensions for technical review.

Pre-Bending Capability

Proper edge preparation and pre-bending help minimize excessive flat sections and improve shell formation.

Complete Fabrication Ecosystem

Rolling can be integrated with cutting, welding, and other fabrication requirements through the parent company's broader capabilities.

Lahore-Based, Pakistan-Wide Service

Our Lahore facility serves customers locally while supporting project requirements in Karachi, Islamabad, Rawalpindi, Faisalabad, Multan, Gujranwala, Peshawar, and other locations across Pakistan.

Procurement-Friendly Service

We understand that industrial purchasing is driven by more than price. Technical clarity, delivery commitments, dimensional requirements, quantity, and communication all matter.

Whether you are building one custom tank, fabricating a replacement component, or requiring multiple shell sections for an ongoing manufacturing project, our team can assess the requirement based on the technical information provided.

Suitable for:

Prototype & One-Off Jobs
For engineering workshops and manufacturers developing custom equipment.

Small Production Runs
For projects requiring multiple identical or related rolled components.

Regular Manufacturing Requirements
For manufacturers that need an outsourced rolling partner for recurring fabrication work.

If you have a drawing, send it to our team for review and quotation.

1. Can you roll MS sheets thicker than 4mm?

Our specialized MS sheet rolling service is focused on thicknesses up to 4mm. If your project requires rolling material thicker than 4mm, contact our fabrication team with the required thickness, diameter, dimensions, and application.

Because we are part of a broader steel fabrication operation, we may be able to recommend an alternative fabrication approach or suitable solution for your requirement rather than simply rejecting the project.

2. Do you manufacture dish ends along with shell rolling?

Yes. We can coordinate mild steel dish ends with MS shell rolling for suitable tank, vessel, and equipment fabrication projects.

Depending on your design, requirements may include flanged, torispherical-style, semi-elliptical, or other custom configurations.

Providing the complete drawing is the best way to confirm feasibility, dimensions, material requirements, and the appropriate fabrication process.

3. How do you handle delivery from Lahore to Karachi, Islamabad, or other cities?

Our Lahore-based operation can supply customers across Pakistan through established freight and transportation networks.

Depending on component dimensions, quantity, packaging requirements, and destination, transportation can be arranged for locations including Karachi, Islamabad, Rawalpindi, Faisalabad, Multan, Gujranwala, Peshawar, and other Pakistani cities.

For oversized or heavy fabricated components, transportation requirements should be discussed during quotation so the logistics can be planned appropriately.

4. How can I get an accurate price estimate for my rolling project?

The fastest way is to provide your drawing or complete technical dimensions.

At minimum, tell us:

• MS sheet thickness
• Required inside or outside diameter
• Sheet length and width
• Number of pieces
• Cylindrical or conical shape
• Whether material will be supplied by you
• Required delivery location
• Required completion date

Once these details are available, our team can assess the work and prepare a project-specific quotation.

5. What information do you need to start my custom rolling order?

Ideally, send a fabrication drawing showing the required dimensions and geometry.

If a drawing is not available, provide:

Material: Mild Steel
Thickness: Up to 4mm
Diameter: Inside or outside diameter
Shell Length: Required finished length
Sheet Size: Available or required sheet dimensions
Quantity: Number of components
Geometry: Cylinder, cone, or other profile
Application: Tank, silo, duct, machinery, etc.
Location: Delivery city in Pakistan
Timeline: Required completion date

Our technical team can then determine what additional information is required before production.

Send Your Dimensions. Get a Technical Quote.

Whether you need 4mm MS sheet rolling, custom cylindrical shells, cone rolling, or mild steel dish ends in Pakistan, our Lahore-based fabrication team can review your requirement and recommend the appropriate production approach.

Don't rely on a generic rolling rate when your final cost depends on diameter, thickness, quantity, geometry, and fabrication requirements.

Send your drawing or project dimensions today.

[ Request a Technical Quote ]

Lahore-Based Manufacturing • Nationwide Pakistan Delivery • MS Rolling Up to 4mm